|
Safe-T-Plug
|
|
Academy Plugs
|
|
Wiring Kit
|
|
Small Candelabra
|
|
|
|
|
|
|
|
|
|
|
The Safe-T-Plug has Easy Assembly: Cut end of wire blunt. Bend blunt wire end into slot at plug end. Lay flat side of wire into groove across top of plug. Slide cap over top of plug. U.L. Listed.
|
The Academy Plug is a snap-on plug that assembles in seconds with no tools! For use with lamp cord (18-2 SPT-1). For easy assembly: wire end must be cut clean, not stripped. Squeeze blades to remove inner unit and spread blades apart. Place wire through cover and into inner unit. Squeeze blades together and press inner unit firmly into cover. U.L. Listed.
|
Light up your business with light up clocks, ceramics, and more. Each comes with an 18 gauge, 6' white cord with switch 4' from plug, socket, mounting hardware, and bulbs.
|
|
|
|
|
Loose End Plug Kit
|
|
Scenery Wiring Kit
|
|
Candelabra Sockets
|
|
Cords With Switches, Plugs & Stripped Ends
|
|
|
|
|
|
|
|
|
|
|
The Loose End Plug Kit include candelabra socket, 1 gauge 6' white cord, and a loose end plug.
|
The Scenery Wiring Kit is used when the heat from larger watt light bulbs may cause overheating. Available in large or small, each comes with a 6' white cord with switch 18" from the plug, socket, mounting hardware and bulbs. Kits come unassembled.
|
Candelabra Socket, Candelabra Socket with Flat Side Mounted Bracket, Adjustable Height Keyless Candelabra Socket, Candelabra Slide-On Socket, Pigtail Candelabra Socket, Candelabra Socket With Butterfly Clip
|
UL/CSA Approved. Switches are 18" from stripped end on both 6' and 8' cords. 18 gauge wire.
|
|
|
|
6' White Cord
|
|
Cords With Plugs & Stripped Ends
|
|
Cords With Snap-In Candelabra Socket & Switch
|
|
Cords With Candelabra Sockets
|
|
|
|
|
|
|
|
|
|
|
UL/CSA Approved. Switches are 18" from stripped end on both 6' and 8' cords. 18 gauge wire.
|
Cords With Plugs & Stripped Ends
|
These Cords with Snap-In Candelabra Socket & Switch are UL/CSA Approved. The switches are 4' from plug end. 18 gauge wire. Style F has a metal-lined socket with a switch that is 4 1/2' from plug end.
|
The Cords with Candelabra Sockets are UL/CSA Approved. 18 gauge wire. Style G has a snap-in socket. Style H has a metal-lined pop-in socket that is 1" (25mm) high, goes into the piece 1/4" (6mm), and fits a 1" (25mm) hole.
|
|
|
|
Standard Sockets
|
|
A. Single-Turn Knob Socket
|
|
A. 3-Way Knob Socket
|
|
B. Push-Thru Socket
|
|
|
|
|
|
|
|
|
|
A. Brass Single-Turn Knob Socket
For use with standard bulbs. UL Listed.
A. Brass 3-Way Knob Socket
For use with 3-way bulbs. UL Listed.
B. Brass Push-Thru Socket
For use with standard bulbs. UL Listed.
C. Quick-Snap 3-way Socket
No more stripping, knotting or terminal screws! Just place blunt cut end of cord in place and snap closed. For use with standard bulbs. UL Listed.
D. Leviton Push-Thru Socket
Single circuit push-thru standard base socket with bright brass finish. 660-watt, 250-volt capacity. UL Listed/CSA Certified.
|
A. Brass Single-Turn Knob Socket
For use with standard bulbs. UL Listed.
A. Brass 3-Way Knob Socket
For use with 3-way bulbs. UL Listed.
B. Brass Push-Thru Socket
For use with standard bulbs. UL Listed.
C. Quick-Snap 3-way Socket
No more stripping, knotting or terminal screws! Just place blunt cut end of cord in place and snap closed. For use with standard bulbs. UL Listed.
D. Leviton Push-Thru Socket
Single circuit push-thru standard base socket with bright brass finish. 660-watt, 250-volt capacity. UL Listed/CSA Certified.
|
A. Brass Single-Turn Knob Socket
For use with standard bulbs. UL Listed.
A. Brass 3-Way Knob Socket
For use with 3-way bulbs. UL Listed.
B. Brass Push-Thru Socket
For use with standard bulbs. UL Listed.
C. Quick-Snap 3-way Socket
No more stripping, knotting or terminal screws! Just place blunt cut end of cord in place and snap closed. For use with standard bulbs. UL Listed.
D. Leviton Push-Thru Socket
Single circuit push-thru standard base socket with bright brass finish. 660-watt, 250-volt capacity. UL Listed/CSA Certified.
|
A. Brass Single-Turn Knob Socket
For use with standard bulbs. UL Listed.
A. Brass 3-Way Knob Socket
For use with 3-way bulbs. UL Listed.
B. Brass Push-Thru Socket
For use with standard bulbs. UL Listed.
C. Quick-Snap 3-way Socket
No more stripping, knotting or terminal screws! Just place blunt cut end of cord in place and snap closed. For use with standard bulbs. UL Listed.
D. Leviton Push-Thru Socket
Single circuit push-thru standard base socket with bright brass finish. 660-watt, 250-volt capacity. UL Listed/CSA Certified.
|
|
|
|
SPT2 Brown 8' Cord
|
|
AA Battery to Electric Converter
|
|
|
|
|
|
|
|
|
|
|
SPT 2 Brown 8' Cord with molded plug on end. UL Listed and CSA rated. Recommended for lamps (SPT2 cord) stronger, heavier insulation.
|
With the AA Battery to Electric Converter you can switch out a battery operated movement for electric movement just by taking out the battery! The conversion is achieved by BACK-UP's patent pending external AC-DC power supply, which will simultaneously operate the clock and trickle charge its internal Ni-Cad battery. BACK-UP insures the clock continues to function in the event of a power failure; essentially making it an Uninterrupted Power Supply (UPS) for the clock.
|
|
|
